> For the complete documentation index, see [llms.txt](https://docs.arkelectron.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.arkelectron.com/products/radio/ark-microhard-ddl-carrier/hardware.md).

# Hardware Reference

## Specifications

| Specification               | Value                                                                                                                                                                                                                                                                                                                                                |
| --------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Radio socket                | [Microhard](https://www.microhardcorp.com/) Pico                                                                                                                                                                                                                                                                                                     |
| Supported modules           | [pMDDL2460](https://www.microhardcorp.com/pMDDL2460.php), [pMDDL2550](https://www.microhardcorp.com/pMDDL2550.php), [pMDDL2450](https://www.microhardcorp.com/pMDDL2450.php), [pMDDL2350](https://www.microhardcorp.com/pMDDL2350.php), [pDDL1800](https://www.microhardcorp.com/pDDL1800.php), [pDDL900](https://www.microhardcorp.com/pDDL900.php) |
| Serial                      | Pixhawk standard, 6-pin JST-GH, 3.3 V UART                                                                                                                                                                                                                                                                                                           |
| Ethernet                    | LAN and WAN ports, 4-pin JST-GH each                                                                                                                                                                                                                                                                                                                 |
| USB                         | USB-C: USB 2.0 data, USB Power Delivery sink, Ethernet over USB, serial over USB                                                                                                                                                                                                                                                                     |
| Battery input               | 5.5–55 V, 2-pin Molex Nano-Fit                                                                                                                                                                                                                                                                                                                       |
| Reverse polarity protection | Yes                                                                                                                                                                                                                                                                                                                                                  |
| Buttons                     | Configuration, reset                                                                                                                                                                                                                                                                                                                                 |
| Fan                         | 5 V and GND pads                                                                                                                                                                                                                                                                                                                                     |
| Weight                      | 18 g without a radio module, 26 g with one                                                                                                                                                                                                                                                                                                           |

## Pinout

<figure><img src="https://1515919775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FOwmEn1N45AR4WjMQhHlu%2Fuploads%2Fqj6cNh8aySdW5Orsgi3i%2FAcrobat_xLiwBDqr64.png?alt=media&amp;token=73f8456f-065b-4410-b6ed-f5ab6cc7ffb3" alt=""><figcaption><p>ARK Microhard DDL Carrier Connections</p></figcaption></figure>

### Battery — 2-pin Molex Nano-Fit

Molex 1054301202. Mates with [45130](https://www.molex.com/en-us/part-list/45130?physical_circuitsMaximum=%222%22\&physical_numberOfRows=%221%22).

| Pin | Signal  | Voltage    |
| --- | ------- | ---------- |
| 1   | BAT\_IN | 5.5V - 55V |
| 2   | GND     | GND        |

### LAN — 4-pin JST-GH

| Pin | Signal     | Voltage |
| --- | ---------- | ------- |
| 1   | LAN\_RD\_N | 50V     |
| 2   | LAN\_RD\_P | 50V     |
| 3   | LAN\_TD\_N | 50V     |
| 4   | LAN\_TD\_P | 50V     |

### WAN — 4-pin JST-GH

| Pin | Signal     | Voltage |
| --- | ---------- | ------- |
| 1   | WAN\_RD\_N | 50V     |
| 2   | WAN\_RD\_P | 50V     |
| 3   | WAN\_TD\_N | 50V     |
| 4   | WAN\_TD\_P | 50V     |

### Serial — 6-pin JST-GH

| Pin | Signal                            | Voltage    |
| --- | --------------------------------- | ---------- |
| 1   | No Connect                        | No Connect |
| 2   | FC\_TX\_OUT\_RADIO\_RX\_IN\_EXT   | 3.3V       |
| 3   | FC\_RX\_IN\_RADIO\_TX\_OUT\_EXT   | 3.3V       |
| 4   | FC\_CTS\_IN\_RADIO\_CTS\_OUT\_EXT | 3.3V       |
| 5   | FC\_RTS\_OUT\_RADIO\_RTS\_IN\_EXT | 3.3V       |
| 6   | GND                               | GND        |

## LEDs

5 V and 3.3 V power, module CPU status, wireless TX and RX, three RSSI bars, LAN link and WAN link.

## Antennas

Connect an antenna tuned to the module's band to every antenna port, on both the air and ground radios. The pMDDL2450 is 2×2 MIMO, with two U.FL ports labeled ANT1 and ANT2.

| Radio  | Antennas                                                                         | Mounting                                   |
| ------ | -------------------------------------------------------------------------------- | ------------------------------------------ |
| Air    | Two 2–3 dBi dipoles with U.FL leads                                              | Vertical, at least half a wavelength apart |
| Ground | Two omnidirectional antennas of about 5 dBi, on U.FL to RP-SMA bulkhead pigtails | High, with a clear view of the flight area |

Half a wavelength is 6 cm at 2.4 GHz. Keep the air antennas clear of carbon fiber and of other radios in the same band, such as a 2.4 GHz radio control receiver. For more range when the aircraft stays in one direction from the ground station, use a directional patch antenna on the ground radio.

{% hint style="warning" %}
Set the radio's transmit power so that transmit power plus antenna gain stays within your local limit on effective isotropic radiated power (EIRP). The pMDDL2450 transmits up to 30 dBm. At 2.4 GHz, the limit is 36 dBm in the US and 20 dBm in the UK and EU.
{% endhint %}

## Assembly

1. Remove all connections from the board.
2. Place the thermal pad on the copper in the socket.
3. Insert the Microhard module with the antenna connectors nearest to the edge of the board.

## Disassembly

1. Remove all connections from the board.
2. Using a small screwdriver, pry the non-antenna connector corner from the socket. Being careful to not damage the PCB or socket. Prying against the metal RF shield works well.
3. Remove the thermal pad.

## 3D Model and Case

| File                                                                                                                                                                           | Contents       |
| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | -------------- |
| [ARK\_Microhard\_DDL\_Carrier\_Rev\_2.0.step](https://github.com/ARK-Electronics/ark-hardware/raw/main/ARK_Microhard_DDL_Carrier/model/ARK_Microhard_DDL_Carrier_Rev_2.0.step) | Board, rev 2.0 |
| [Microhard\_Case.step](https://github.com/ARK-Electronics/ark-hardware/raw/main/ARK_Microhard_DDL_Carrier/case/Microhard_Case.step)                                            | Case           |
| [Top\_Case.stl](https://github.com/ARK-Electronics/ark-hardware/raw/main/ARK_Microhard_DDL_Carrier/case/Top_Case.stl)                                                          | Case top       |
| [Bottom\_Case.stl](https://github.com/ARK-Electronics/ark-hardware/raw/main/ARK_Microhard_DDL_Carrier/case/Bottom_Case.stl)                                                    | Case bottom    |

All files: [ARK\_Microhard\_DDL\_Carrier in ark-hardware](https://github.com/ARK-Electronics/ark-hardware/tree/main/ARK_Microhard_DDL_Carrier)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.arkelectron.com/products/radio/ark-microhard-ddl-carrier/hardware.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
