Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Hardware Reference

Specifications

Specification
Value

Radio socket

Serial

Pixhawk standard, 6-pin JST-GH, 3.3 V UART

Ethernet

LAN and WAN ports, 4-pin JST-GH each

USB

USB-C: USB 2.0 data, USB Power Delivery sink, Ethernet over USB, serial over USB

Battery input

5.5–55 V, 2-pin Molex Nano-Fit

Reverse polarity protection

Yes

Buttons

Configuration, reset

Fan

5 V and GND pads

Weight

18 g

Pinout

ARK Microhard DDL Carrier Connections

Battery — 2-pin Molex Nano-Fit

Molex 1054301202. Mates with 45130.

Pin
Signal
Voltage

1

BAT_IN

5.5V - 55V

2

GND

GND

LAN — 4-pin JST-GH

Pin
Signal
Voltage

1

LAN_RD_N

50V

2

LAN_RD_P

50V

3

LAN_TD_N

50V

4

LAN_TD_P

50V

WAN — 4-pin JST-GH

Pin
Signal
Voltage

1

WAN_RD_N

50V

2

WAN_RD_P

50V

3

WAN_TD_N

50V

4

WAN_TD_P

50V

Serial — 6-pin JST-GH

Pin
Signal
Voltage

1

No Connect

No Connect

2

FC_TX_OUT_RADIO_RX_IN_EXT

3.3V

3

FC_RX_IN_RADIO_TX_OUT_EXT

3.3V

4

FC_CTS_IN_RADIO_CTS_OUT_EXT

3.3V

5

FC_RTS_OUT_RADIO_RTS_IN_EXT

3.3V

6

GND

GND

LEDs

5 V and 3.3 V power, module CPU status, wireless TX and RX, three RSSI bars, LAN link and WAN link.

Assembly

  1. Remove all connections from the board.

  2. Place the thermal pad on the copper in the socket.

  3. Insert the Microhard module with the antenna connectors nearest to the edge of the board.

Disassembly

  1. Remove all connections from the board.

  2. Using a small screwdriver, pry the non-antenna connector corner from the socket. Being careful to not damage the PCB or socket. Prying against the metal RF shield works well.

  3. Remove the thermal pad.

3D Model and Case

All files: ARK_Microhard_DDL_Carrier in ark-hardware

Last updated