# ARK Microhard DDL Carrier

<figure><img src="/files/c3ZN3iWl51vgRinL0sXG" alt=""><figcaption><p>ARK Microhard DDL Carrier Connections</p></figcaption></figure>

## Pinout

#### BAT - 2 Pin Molex Nano-Fit 1054301202 - Mates with [45130](https://www.molex.com/en-us/part-list/45130?physical_circuitsMaximum=%222%22\&physical_numberOfRows=%221%22)

<table><thead><tr><th width="134">Pin Number</th><th width="237">Signal Name</th><th>Voltage</th></tr></thead><tbody><tr><td>1</td><td>BAT_IN</td><td>5.5V - 55V</td></tr><tr><td>2</td><td>GND</td><td>GND</td></tr></tbody></table>

#### LAN - 4 Pin JST-GH

<table><thead><tr><th width="134">Pin Number</th><th width="237">Signal Name</th><th>Voltage</th></tr></thead><tbody><tr><td>1</td><td>LAN_RD_N</td><td>50V</td></tr><tr><td>2</td><td>LAN_RD_P</td><td>50V</td></tr><tr><td>3</td><td>LAN_TD_N</td><td>50V</td></tr><tr><td>4</td><td>LAN_TD_P</td><td>50V</td></tr></tbody></table>

#### WAN - 4 Pin JST-GH

<table><thead><tr><th width="134">Pin Number</th><th width="237">Signal Name</th><th>Voltage</th></tr></thead><tbody><tr><td>1</td><td>WAN_RD_N</td><td>50V</td></tr><tr><td>2</td><td>WAN_RD_P</td><td>50V</td></tr><tr><td>3</td><td>WAN_TD_N</td><td>50V</td></tr><tr><td>4</td><td>WAN_TD_P</td><td>50V</td></tr></tbody></table>

#### Serial - 6 Pin JST-GH

<table><thead><tr><th width="134">Pin Number</th><th width="237">Signal Name</th><th>Voltage</th></tr></thead><tbody><tr><td>1</td><td>No Connect</td><td>No Connect</td></tr><tr><td>2</td><td>FC_TX_OUT_RADIO_RX_IN_EXT</td><td>3.3V</td></tr><tr><td>3</td><td>FC_RX_IN_RADIO_TX_OUT_EXT</td><td>3.3V</td></tr><tr><td>4</td><td>FC_CTS_IN_RADIO_CTS_OUT_EXT</td><td>3.3V</td></tr><tr><td>5</td><td>FC_RTS_OUT_RADIO_RTS_IN_EXT</td><td>3.3V</td></tr><tr><td>6</td><td>GND</td><td>GND</td></tr></tbody></table>

## Assembly

1. Remove all connections from the board.
2. Place the thermal pad on the copper in the socket.
3. Insert the Microhard module with the antenna connectors nearest to the edge of the board.

## Disassembly

1. Remove all connections from the board.
2. Using a small screwdriver, pry the non-antenna connector corner from the socket. Being careful to not damage the PCB or socket. Prying against the metal RF shield works well.
3. Remove the thermal pad.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.arkelectron.com/products/radio/ark-microhard-ddl-carrier.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.