> For the complete documentation index, see [llms.txt](https://docs.arkelectron.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.arkelectron.com/products/imu/ark-adis16507/hardware.md).

# Hardware Reference

## Specifications

| Specification         | Value                                                                                                                                  |
| --------------------- | -------------------------------------------------------------------------------------------------------------------------------------- |
| IMU                   | [Analog Devices ADIS16507-2](https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16507.pdf), 6-axis precision MEMS |
| Gyroscope             | ±500 °/s; in-run bias stability 2.7 °/h (datasheet typical, 1 σ)                                                                       |
| Accelerometer         | ±40 g; in-run bias stability 12.7 µg (X, Y), 13.7 µg (Z)                                                                               |
| Calibration           | Factory calibrated sensitivity, bias and axial alignment, −40 °C to +85 °C                                                             |
| Interface             | SPI, 11-pin JST-GH                                                                                                                     |
| Power                 | 5 V, 41 mA average                                                                                                                     |
| Dimensions            | 2.5 × 2.25 × 0.71 cm                                                                                                                   |
| Operating temperature | −25 °C to +85 °C                                                                                                                       |
| Storage temperature   | −25 °C to +85 °C                                                                                                                       |
| Weight                | 4 g                                                                                                                                    |

The ADIS16507 is rated −40 °C to +105 °C operating and −65 °C to +150 °C storage.

## Pinout

### SPI — 11-pin JST-GH

The pinout matches the [ARK PAB carrier SPI connector](https://docs.px4.io/main/en/flight_controller/arkpab.html#spi6); nCS2 and DRDY2 are not connected.

| Pin      | Signal                            | Voltage |
| -------- | --------------------------------- | ------- |
| 1 (red)  | `VDD_5V_IN`                       | +5.0V   |
| 2        | SPI6\_SCK                         | +3.3V   |
| 3        | SPI6\_MISO                        | +3.3V   |
| 4        | SPI6\_MOSI                        | +3.3V   |
| 5        | SPI6\_nCS1                        | +3.3V   |
| 6        | NC                                | +3.3V   |
| 7        | SPIX\_nSYNC                       | +3.3V   |
| 8        | SPI6\_DRDY1                       | +3.3V   |
| 9        | NC                                | +3.3V   |
| 10       | SPI6\_nRESET (10k pullup to 3.3V) | +3.3V   |
| 11 (blk) | GND                               | GND     |

## Datasheets

* [ARK ADIS16507](https://github.com/ARK-Electronics/ark-hardware/blob/main/ARK_ADIS16507/datasheet/ARK_ADIS16507_Datasheet.pdf)
* [Analog Devices ADIS16507](https://www.analog.com/media/en/technical-documentation/data-sheets/ADIS16507.pdf)

## 3D Model and Case

| File                                                                                                                                                     | Contents     |
| -------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------ |
| [ARK\_ADIS16507\_REV\_1\_3D\_Model.step](https://github.com/ARK-Electronics/ark-hardware/raw/main/ARK_ADIS16507/model/ARK_ADIS16507_REV_1_3D_Model.step) | Board, rev 1 |
| [Top\_Case.stl](https://github.com/ARK-Electronics/ark-hardware/raw/main/ARK_ADIS16507/case/Top_Case.stl)                                                | Case top     |
| [Bottom\_Case.stl](https://github.com/ARK-Electronics/ark-hardware/raw/main/ARK_ADIS16507/case/Bottom_Case.stl)                                          | Case bottom  |

All files: [ARK\_ADIS16507 in ark-hardware](https://github.com/ARK-Electronics/ark-hardware/tree/main/ARK_ADIS16507)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.arkelectron.com/products/imu/ark-adis16507/hardware.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
