Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Release Notes

6.2.2.8 - 2026-10-30

  • The UEFI boot order is re-sorted on every boot with the NVMe first: a boot without the SSD detected no longer moves it to the end of the order, where the unit stopped in the UEFI shell instead of booting

  • A boot order changed in the UEFI menu now resets on the next boot; use the F11 boot menu for a one-time boot from another device

6.2.2.7 - 2026-10-19

  • SuperSpeed devices on J33 no longer fall back to USB 2.0: its VBUS now comes up with the USB host instead of at power-on

  • J33's load-switch over-current shutoff now works

  • ARK-OS updated to v1.3.1: adds a Logs page and PointPerfect client fixes

  • Boots the NVMe first: network boot (HTTP/PXE) no longer runs before the SSD, and NVMe outranks USB storage

  • apt upgrade no longer replaces the ARK kernel and device tree with NVIDIA's stock ones, and apt install nvidia-jetpack now works

  • A root filesystem on a UAS USB drive now mounts

  • SSH no longer stays dead if power is cut while the first boot generates host keys

  • The serial console prints errors only, so a burst of kernel warnings can no longer stall boot into a watchdog reset

  • Boot is about 2 s faster: the unconnected PCIe controller C7 is no longer brought up

6.2.2.6 - 2026-07-23

  • ARK-OS updated to v1.2.0

6.2.2.5 - 2026-07-21

  • The camera userspace (Argus, nvarguscamerasrc and the NVIDIA multimedia libraries) is pinned to the L4T 36.4.4 packages and held from apt upgrade, fixing nvargus-daemon crashes and dropped frames when a camera pipeline is restarted

  • The kernel now includes WireGuard VPN support as the wireguard module

6.2.2.4 - 2026-07-09

  • Quad IMX219 is still the default camera setup, but selecting another camera in jetson-io now works; before, the built-in default collided with it

  • jetson-io now lists the CSI camera overlays, which were missing from its menu in 6.2.2.1

  • Added IMX708 (Raspberry Pi / Arducam Camera Module 3) support with an IMX708 Quad camera overlay

  • Removed the single-camera IMX219 and IMX477 overlays, and the jetson-io camera names drop the ARK prefix (for example Camera IMX219 Quad)

  • nvarguscamerasrc and the other NVIDIA GStreamer camera plugins are now preinstalled

  • The I2S0 connector pins now boot as GPIO inputs idling high on the carrier pull-ups instead of being driven low, so the ARK I2S to GPIO overlay is no longer needed and was removed

  • MAVSDK is no longer installed system-wide: ARK-OS bundles its own under /usr/lib/ark-os/mavsdk, so install MAVSDK yourself if your code links against it

  • Preinstalled gpiod, i2c-tools, usbutils, pciutils, v4l-utils, uhubctl, inxi, xdotool and x11-xserver-utils, plus the Python packages spidev, pyserial, dronecan, smbus2 and Jetson.GPIO

  • The system clock now starts at the image build time, so desktop autologin works on a first boot without network time

  • ARK-OS updated to v1.1.0

  • The flasher is now fetched from the main branch and flashes any release; it is no longer attached to each release

6.2.2.1 - 2026-06-10

  • Initial release on JetPack 6.2.2 (L4T R36.5.0): one NVMe image with Super mode for every Orin Nano and Orin NX module

  • Quad IMX219 cameras are enabled by default

  • Ships with ARK-OS v1.0.0, MAVSDK 3.17.1 and jtop preinstalled

Last updated