> For the complete documentation index, see [llms.txt](https://docs.arkelectron.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.arkelectron.com/products/flight-controller/arkv6x/hardware.md).

# Hardware Reference

<figure><img src="https://1515919775-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FOwmEn1N45AR4WjMQhHlu%2Fuploads%2FwqSqeEjKl9QlZ922bvEr%2Fark_v6x_front.D40XTXGs.jpg?alt=media&amp;token=c83b5ba6-57f9-495e-ab90-1a4d7fbed498" alt=""><figcaption><p>ARK Electronics ARKV6X</p></figcaption></figure>

## Specifications

| Specification         | Value                                                                                                                                                                                                                           |
| --------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| MCU                   | [STM32H743IIK6](https://www.st.com/en/microcontrollers-microprocessors/stm32h743ii.html), 480 MHz, 2 MB flash, 1 MB RAM                                                                                                         |
| IMUs                  | [Dual Invensense ICM-42688-P](https://invensense.tdk.com/products/motion-tracking/6-axis/icm-42688-p/) and [Invensense IIM-42652](https://invensense.tdk.com/products/smartindustrial/iim-42652/) industrial IMU, triple synced |
| IMUs, Extended Range  | [Triple Invensense IIM-42653](https://invensense.tdk.com/products/smartindustrial/iim-42653/) industrial IMUs: 4000 dps gyroscope and 32 g accelerometer, against 2000 dps and 16 g on the IIM-42652 and ICM-42688-P            |
| Barometer             | [Bosch BMP390](https://www.bosch-sensortec.com/en/products/environmental-sensors/pressure-sensors/bmp390)                                                                                                                       |
| Magnetometer          | [Bosch BMM150](https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmm150-ds001.pdf)                                                                                                                  |
| Memory                | FRAM                                                                                                                                                                                                                            |
| PWM outputs           | 8 FMU outputs. DShot on 1–6 only: 7–8 are on TIM12, which has no DMA. A carrier with PX4IO adds 8 PWM outputs                                                                                                                   |
| Form factor           | [Pixhawk Autopilot Bus (PAB)](https://github.com/pixhawk/Pixhawk-Standards/blob/master/DS-010%20Pixhawk%20Autopilot%20Bus%20Standard.pdf)                                                                                       |
| Heater                | 1 W. Keeps sensors warm in extreme conditions                                                                                                                                                                                   |
| Storage               | MicroSD slot                                                                                                                                                                                                                    |
| Indicators            | LEDs                                                                                                                                                                                                                            |
| Power                 | 5 V, 500 mA: 300 mA main system, 200 mA heater                                                                                                                                                                                  |
| Mounting              | PAB. In the bundles, the module is screwed into the ARK PAB Carrier with four M2×8 mm screws                                                                                                                                    |
| Operating temperature | −10 °C to +60 °C                                                                                                                                                                                                                |
| Storage temperature   | −10 °C to +60 °C                                                                                                                                                                                                                |
| Dimensions            | 3.6 × 2.9 × 0.5 cm                                                                                                                                                                                                              |
| Weight                | 5.0 g                                                                                                                                                                                                                           |
| Compliance            | USA built, NDAA compliant, [Blue Framework listed](https://tyrionprod.servicenowservices.com/gsp?id=framework_list)                                                                                                             |

## Pinout

{% hint style="info" %}
**Using the ARKV6X on an ARK PAB Carrier?** See the [ARK Pixhawk Autopilot Bus Carrier Pinout](https://docs.arkelectron.com/products/flight-controller/ark-pixhawk-autopilot-bus-carrier/hardware/pinout.md).
{% endhint %}

For pinout of the ARKV6X board-to-board connectors see the [DS-10 Pixhawk Autopilot Bus Standard](https://github.com/pixhawk/Pixhawk-Standards/blob/master/DS-010%20Pixhawk%20Autopilot%20Bus%20Standard.pdf).

All wiring connectors — GPS, TELEM, CAN, PWM, and the rest — are broken out by the carrier board, not the ARKV6X itself. For the ARK PAB Carrier, see:

{% content-ref url="/pages/8FoCumpSHonz9iz7bpP3" %}
[Pinout](https://docs.arkelectron.com/products/flight-controller/ark-pixhawk-autopilot-bus-carrier/hardware/pinout.md)
{% endcontent-ref %}

## Serial Port Mapping

| UART   | Device     | Port          |
| ------ | ---------- | ------------- |
| USART1 | /dev/ttyS0 | GPS           |
| USART2 | /dev/ttyS1 | TELEM3        |
| USART3 | /dev/ttyS2 | Debug Console |
| UART4  | /dev/ttyS3 | UART4 & I2C   |
| UART5  | /dev/ttyS4 | TELEM2        |
| USART6 | /dev/ttyS5 | PX4IO/RC      |
| UART7  | /dev/ttyS6 | TELEM1        |
| UART8  | /dev/ttyS7 | GPS2          |

## Datasheet

* [ARKV6X](https://github.com/ARK-Electronics/ark-hardware/blob/main/ARKV6X/datasheet/ARKV6X_Datasheet.pdf)

## 3D Model and Case

The ARKV6X Extended Range uses the same board model.

| File                                                                                                                 | Contents      |
| -------------------------------------------------------------------------------------------------------------------- | ------------- |
| [ARKV6X\_3D\_Model.step](https://github.com/ARK-Electronics/ark-hardware/raw/main/ARKV6X/model/ARKV6X_3D_Model.step) | Board         |
| [ARKV6X\_3D\_PDF.pdf](https://github.com/ARK-Electronics/ark-hardware/raw/main/ARKV6X/model/ARKV6X_3D_PDF.pdf)       | Board, 3D PDF |

All files: [ARKV6X in ark-hardware](https://github.com/ARK-Electronics/ark-hardware/tree/main/ARKV6X)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.arkelectron.com/products/flight-controller/arkv6x/hardware.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
