Skip to content
For the complete documentation index, see llms.txt. This page is also available as Markdown.

Firmware

The ARKV6X ships with PX4 and can be flashed with ArduPilot. The ARKV6X Extended Range needs PX4 1.14 or later, or ArduPilot 4.6.3 or later.

Firmware
Build target

PX4

ark_fmu-v6x_default (boards/ark/fmu-v6x)

ArduPilot

ARKV6X (hwdef)

PX4

Flashing Firmware

QGroundControl (USB-C)

Firmware can be flashed over USB C using QGroundControl.

px4_uploader.py (USB or UART)

px4_uploader.py can flash firmware over USB or UART. For UART flashing, only the Telem1 port is supported.

Over USB:

python3 Tools/px4_uploader.py build/ark_fmu-v6x_default/ark_fmu-v6x_default.px4

Over UART (via Telem1):

python3 Tools/px4_uploader.py --port /dev/<your-uart> build/ark_fmu-v6x_default/ark_fmu-v6x_default.px4

Building Firmware

make ark_fmu-v6x_default

and optionally upload

ArduPilot

Flashing Firmware

Firmware can be flashed over USB C using QGroundControl.

Building Firmware

and optionally upload

For a carrier board with an IOMCU, change the hwdef first: see hwdef modifications for use with an IOMCU.

Recovering the Bootloader (SWD)

The application is at 0x08020000 (128 KB sectors).

Use ark_fmu-v6x_bootloader.bin from boards/ark/fmu-v6x/extras/ in PX4-Autopilot, or from PX4 GitHub releases. Then flash ark_fmu-v6x_default.px4 over USB. Setup: ST-LINK Flashing Guide.

Last updated